Craft ~ How to Make an AG Slow Cooker Set!

Hi there!! *Waves*

I’m……. Back!!!

It’s been a (long!) while. School has been keeping me busy lately, and I haven’t worked on posts as much. So I guess that means I’m back from an unofficial hiatus! I hope to get more on track now after my long break.

AND, I recently got something that I am excited to show you all… 😮 …

…in another post! 😉  So stay tuned for another post soon!!

ALSO, November is here… so I am looking forward to hosting another Basket of Thankfulness activity, like last year!! Anyone remember it?

 

SO, today I am going to show you how to craft a replica of American Girl’s slow cooker set!

Slow Cooker

I’ve really liked this set for a while now, but it costs a pretty penny. So why not just make it instead? Enjoy!

 

You Will Need:

For the slow cooker: 

  • An empty cardboard paper towel or toilet paper roll
  • Colored craft foam
  • Hot glue (regular glue may work too)
  • Paperboard (like cereal box cardboard)
  • A pen or fine tip sharpie
  • Scissors
  • A bead

For the food (Chicken, Broccoli, Rolls, Butter):

  • Clay (I use Sculpey Polymer clay)
  • Acrylic Paint (If you have soft/chalk pastels then you can use those instead, but I don’t in this tutorial)

For the Utensils: 

  • Paperboard
  • Scissors or a craft knife like Xacto
  • Silver paint

Any pieces from the set that are missing from the materials list, I will give a short description for how to make them (or at least some ideas), but I haven’t tried it for this tutorial myself.

I also tried to label everything pretty clearly, so if you are interested in making something specific from this set, feel free to skip around!

Let’s Begin!

 

 

Slow Cooker:

DSCN4635

First off, Cut off a portion of a paper towel/toilet paper tube for the body of your cooker. Mine is a little less than two inches tall.

[This cooker is smaller than the AG one; if you want it bigger, then you can try using paperboard (or just craft foam) to make the tube from scratch.]

I also bent it into a more oval-like shape.

DSCN4638

Then wrap the outside of the tube in craft foam, gluing it down as you wrap it on. I chose a pink/red color.

At this point you can also trace the bottom of your cooker onto some paperboard, cut out the oval, and glue it onto the bottom of the cooker.

DSCN4640

Next cut out three pieces: (1) A paperboard piece cut from tracing the top, (2) A craft foam piece from tracing the top, and (3) a skinny craft foam rectangle/strip that is long enough to wrap around your slow cooker (i.e. as long as the circumference of the cooker), for the lip of the lid. The rectangle/strip does not have to be the same color as your cooker; I made mine grey.

 

DSCN4641

To make the lid, glue the craft foam oval to the paperboard oval, and then glue the strip all the way around those pieces.

DSCN4644

Find the center of your lid and glue on a bead for a handle. I put a little pile of hot glue onto the lid before gluing the bead on top, to make it a bit taller. Make sure the lid fits on your cooker.

DSCN4646

Next cut out a circle of grey craft foam (I just used a hole punch) for the temperature knob. Glue it onto the front of the cooker pot, write a little line on the knob, and write “OFF” “LO” and “HI” around the knob. I also wrote “SLOW cooker” onto the pot. You could write “crock pot” if you want that instead. [Note: for some of this writing I used a fine tip sharpie, and for some I used an extra fine prismacolor pen (like an extra fine tip sharpie). But if you just have the sharpie then that works, too.]

DSCN4799

Next cut out two little trapezoid shapes for the handles of the cooker. mine are approximately a little over an inch long, and a fourth inch wide.

DSCN4804

Glue each angled ends of the trapezoids to the sides of your cooker, forming one loop handle on each side. Maker sure the longer part is on bottom, and the shorter side on top. Here is your finished Slow Cooker!

 

 

Food:

 

Chicken:

 

DSCN4807

First, take some beige (light tan) colored clay and form it into… chicken-portion like shapes? Like badly shaped and flattened beans…… I think you get the point…..

Anyway…

DSCN4809

Then you can add some texture if you want using an old, thick bristled paintbrush, a clean toothbrush, or something like that. Also add the grill lines with a toothpick (or similar tool).

We’ll color it later, after it is cooked/dried! But first I made the rest of the food….

 

 

Broccoli 

 

DSCN4813

First roll out a snake of light green clay. It can be very messy and uneven, as mine is in the picture.

DSCN4817

Then chop the snake into small pieces. These are to be the broccoli stems.

DSCN4822

To make the tops, take pieces of a darker green clay, put a flattened ‘blob’ on a surface and add a lot of texture using a toothpick and a paintbrush/toothbrush. Then take it and wrap it around the end of one of your stems, forming it into the top of your broccoli. Repeat for each stem. [If you’d rather just stick the clay onto the stem and then texture it, that should work fine, too.] Then you can choose to leave each piece of broccoli separate, or combine some of them. I chose to combine them into sets of two broccoli ‘heads.’

 

 

Dinner Rolls

 

DSCN4832

I chose to make my rolls so that they would fit into my Our Generation muffin pan!

To make them, shape beige/light tan/bread colored clay into little cylinders (can shapes) for the dinner roll base. If you want them to fit into a doll pan, then size the base accordingly.

DSCN4835

Then make three little balls for the top of each dinner roll, and stick them on top of the base.

DSCN4837

Next smooth out the lines between the top and bottom of the rolls. Here is a comparison of the smoothed part on the left and the non-smoothed part on the right.

DSCN5038

And here are all of the finished ones! (minus extra coloring later!)

 

I decided not to make the fruit. But if you want to make it you could do a couple of options…

  1. Use clay: Form yellow ball; cut it in half for each grapefruit bowl; slightly push in the flat part to make it slightly caved in for the fruit to go in/on it; dapple the outside with a toothpick to make it look like grapefruit; and add clay pieces shaped like the fruit pieces in/on the bowl.)
  2. Use beads: Beads can make great fruit (especially berries). For the bowl to hold it you can either make one out of clay, or you can use something else (such as a vitamin bottle cap or doll bowl. Perhaps you could even use the plastic container you get from gumball-prize machines or the round part of a small Easter egg.

 

 

Butter

 

If you want to make the butter case that is in the AG set, you could use paperboard for the tray.

However I’m not completely sure how you would make the glass top, but here are a few ideas… 1) finding some clear plastic packaging shaped like the top (perhaps from a pen case or small toy?); 2) use transparent polymer clay. I haven’t tried, so I don’t know how clear it would turn out; 3) lastly you could make the top non-clear using paper or clay.

Onto the actual butter! This is a pretty straightforward thing to make…

Take some pale yellowish clay and form it into a 3-dimensional rectangle/box. Make sure it will fit if you have a container for it, with some room for butter slices on the end. I chose to make my butter to fit in my Our Generation butter box.

DSCN5040

Next take a sharp knife or other cutting tool (I literally used the plastic string from a “squirmles” toy to cut this! XD It worked amazing! ) and make a little slice or two at the end of your stick of butter. Bend the slices out a bit, but leave them connected to the whole stick.

And that’s it!

 

Now you can cook or let dry all of your pieces, and we’ll move on to coloring the Chicken and the Rolls!

 

DSCN5054.JPG

For the chicken, take some brown-ish colored paint (I mixed my yellow ochre and burnt sienna colors) and get some onto your brush. Paint it out on a (paintable) surface until the brush is mostly dry, and then dry-brush the paint onto your chicken. I used a mix of dry-brushing, and even wiping off paint with a damp paper towel to get the look I wanted.

Then take a darker brown color and paint over the indents (grill lines) on your chicken. Wait… why are there grill lines on crock pot chicken???   Oh well, it looks nice!

DSCN5047

For the dinner rolls, just dry-brush a brown color onto the top parts. I used burnt sienna. (make sure the brown you use isn’t too dark, making your rolls look burnt instead of nicely baked)

And your food is done!

DSCN5056

One fun thing about this set, is it all fits in the crockpot! (I’m not sure if the rolls fit, but they bake in the oven anyway)

 

 

Utensils

DSCN5043

First off, draw onto some paperboard a simple fork outline, or few…

DSCN5044

and cut them out. (I cut out one fork and traced it to cut the rest.)

I didn’t make the knife or the tongs, but here is how you can…

Draw out a simple knife shape (or few) and cut those out. (Pretty self-explanatory)

For the tongs, draw out a long strip. Make the ends a little wider and rounder than the rest of the strip. Cut it out and use a skewer, or other thin rounded object to bend the tongs in half. You can add a little glue on the fold/curve if it won’t stay bent. You may also bend the ends in a tad, if you want.

DSCN5046.JPG

 

To finish, paint your utensils silver. You may want a few coats. Also, If you want to, you can paint the knife handle a different color than the blade, like AG’s butter knife, to make the two ends differ from each other.

(Feel free to seal the utensils with mod podge if you want)

 

And that is it!

Here are a few things that I didn’t recreate from this set, and some ideas on how you could make them.

Plates: You could use the flat lid part of canning jars for the large plates, and this tutorial for the small ones.

Milk: You can use little plastic shot cups, or I’ve taken home the little disposable communion cups from church before. And then you can paint the inside of the cups white to make it look like it’s filled with milk, or you could fill the cup with white paint or puffy paint and let dry (Note: it might take a while to dry!)

Napkins and PotholderUse some fabric for the napkins (you can use normal fabric and hem the edges, use felt, or cut from a human napkin.). And you can also use fabric for the pot holder (if you want the edge you can hold, cut a longer rectangle of fabric, fold over some, and sew. You can sew on the little corner loop, too! Feel free to add extra layers of fabric or felt to give it more of an insulated potholder feel.)

Barbecue Sauce: I don’t know exactly how to find a tiny bottle like that, but perhaps an extract container or sprinkle container? You could also try making it out of clay.

 

And we’re finished!!

I hope that you enjoyed this tutorial!!

 

Are you going to make anything from this tutorial? Do you like AG’s Slow Cooker Set?

Is anyone here doing Nanowrimo? I’m doing it for my first time! (I’ve done camp this past summer, but not the real Nano)

Also feel free to comment if you need clarification on any of my instructions! 😉

 

I should be posting again soon with the Basket of Thankfulness activity! … and after that my surprise find… 😉 😉

 

Have a blessed day!!

blog-sign-off

Advertisements

How to Make a Mini Doll Christmas Tree!

CAM02623edit.jpg

Hello!!

Can you believe that it is Christmas time already?

Well, believe it or not,

’tis the season…

to make Christmas trees out of pipe cleaners! You thought I was going to say to be jolly, didn’t you?!

Well, I’m going to show you how to make a cute Christmas tree for your mini dolls!

Let’s get started!

Gather:

  • Pipe Cleaners (8 or more green, and around 3 brown)
  • A Wooden Dowel (probably about as thick as a pencil)
  • Beads/Charms
  • String
  • Scissors
  • Brown Paint

cam02598

First, take your dowel and cut it so it is about an inch taller than your doll (depending on how tall you want your tree to be). Then paint it brown.

cam02599

Now take a brown pipe cleaner, and fold it so there are two folds, so the pipe cleaner is bent into thirds (make the center section a little smaller than the outer ones).

CAM02599edit.jpg

Now fold in the middle of each of the 3 sections to make something like the three pronged formation. The orange arrows point to the places you bend, and the dark green is the pipe cleaner ends sticking up vertically. The pink shows where the corners end up.

cam02602

It should look something like this when you are done.

cam02603

Now allow little ends to stick up, and twist those onto the end of your dowel. Reinforce this with more brown pipe cleaners, twisting around the dowel to make the point of attachment stronger, and twisting around the prongs to make them stronger. This is the base of your tree! So make sure it can stand well on it’s own.

Now this part is a little confusing to explain, but we’re going to make the tree branches.

Take a green pipe cleaner and twist it’s end to the top of the dowel to attach it. Leave the tip of the pipe cleaner sticking up above the dowel. I can show you why later.

cam02606

Now you are going to start wrapping the pipe cleaner around the tree. Add branches as you go by bending the pipe cleaner out away from the tree, then folding it over, back to the dowel. Then you can wrap a little, and repeat. You want the branches to gradually wrap down the tree towards the base. Add more pipe cleaners as needed.

cam02623

Once you get to the base (or a little above) you can adjust the branches to your liking. And now you have a cute little Christmas tree!

And for ornaments, just take beads or charms, and put a little string through them. Tie it off, trim if needed, and hang in on the tree! Remember how I had you leave a little bit of pipe cleaner sticking up at the top? You can use this to put a star shaped bead on top! (Well, I used the back of a yellow flower, but it looks like a star 😉 )

And your done!

cam02620

The minis had a lot of fun with their Christmas tree, and if you make this craft I hope your minis will too!

 

Bye for now!

blog-sign-off

 

Craft Camp at Kaits AG Crafts

Hi! I wanted to let you all know that I am participating in Kaits AG Craft‘s Craft Camp! In other words, I am providing the crafts for this week of camp.

A few of my crafts have already been posted, and we’d both love it if you check it out! Also, I think there might still be openings if you want to join and make crafts for a week. The info is on this page.

There are plenty of other crafts, as well, that have been made by other people for the camp, listed on Kait’s Craft camp page.

Now I can’t leave you picture-less can I?

Therefore, I have some old pictures of our cat. 🙂

My beautiful pictureWIN_20140907_162310

My beautiful picture

 

Hasta la vista!

~Gracie 😉

DIY Doll Toothbrush and Toothpaste Craft

Hi!! Today I have a craft for you all: A doll toothbrush and toothpaste! This was pretty fun to make, I had the idea for the toothpaste bottle in my head for a while, and finally got to test it out. I decided to add a toothbrush because, well, if you have toothpaste then you need a toothbrush as well, right?

So anyways, here it is!

CAM00542[1]

You will need…

(for the toothpaste):

  • paper
  • hot glue
  • a glue stick/glue
  • paint/coloring utensils
  • pen or pencil
  • scissors
  • toothpick or safety pin
  • Optional: modge podge

(for the toothbrush):

  • paperboard (I used a cereal box)
  • white craft foam
  • glue
  • paint
  • scissors
  • Optional: knife like X ACTO; nail file; modge podge

Note: Make sure you have your parent’s permission before using sharp objects and hot glue guns.

Let’s begin!

First take your paper (I used white computer paper) and cut a long strip that is about as wide as you want the length of the body of your bottle to be. I cut the width at about 1  1/2 inches. The length doesn’t have to be specifically measured, but make it at least a few inches long.

1.jpg

Now roll it around a pencil or some other cylindrical object. The object you are rolling it around should be about as thick or a little less than you want your bottle to be. Add some glue from your glue stick as you go.

CAM00490

Take the paper roll off of the pencil, and glue one of the ends so that it is closed. I used hot glue for this part, but if you want to use normal glue, you can hold it closed with a binder clip while it drys.

CAM00498

Now fill up the empty tube with hot glue. Make sure the hot glue is flat on the top of the bottle. the glue might settle while it sits, so you may need to add a little more. If you can’t use hot glue, then you can try filling the hole with tissue and adding glue to make it stay.

CAM00501

Now you can make a label for your toothpaste bottle (we’ll get to the cap in a moment). Make the label a little bit shorter than the bottle. I made mine less wide than the bottle as well. you can design the label however you like. I made mine simple:

CAM00503

For the cap, take a strip of paper similar to the one you made for the bottle, only much thinner. Mine is about 1/4 inch wide. Then roll the strip around a toothpick or thinner object (I used a safety pin) just like you did for the bottle, gluing as you go.CAM00505

make it as thick as you want your cap to be. cut off the excess, or glue on another strip and keep going if you want it thicker.

Now trace around the circular part of both pieces onto paper and cut the circles out.

CAM00506

Glue the circles onto the sides of the cap and bottle that you traced. You don’t need to worry about the uncovered side of the cap.

Now you may paint your cap and bottle, if desired. I painted the cap blue and left the bottle blank. It may help if you put the cap back onto the toothpick or whatever it was on to paint it.

Then glue the label onto the bottle and the cap onto the flat part of the bottle. I would recommend sealing it with a clear drying glue, or modge podge to keep the paint from coming off. And you’re done!

CAM00510

(See the rim on the edge of the bottle? That is the seam made by the two paper pieces…maybe I should have painted that white…. Oh well)

Now for the toothbrush!

Take your paperboard and cut four strips that are about 1  1/2 inches by 1/4 inch. You can adjust the size if you like. Round the edges of your strips and glue them together. If you used a cereal box like I did, then make sure the printed design is hidden.

CAM00522

Now you can carefully cut the strips so they are all the same size, if the edges are off, and sand the edges smooth if you want to.

Then paint the stick you just made. I mixed together a light purple-ey color. Once that dries, I (again) recommend sealing it with modge podge, or a clear-drying glue. This is your toothbrush handle.

CAM00528

Next cut four tiny rectangles of white craft foam. They should be as long as your brush handle is wide. Mine are approximately 1/4 inch by 1/8 inch. glue these together, like you did with your toothbrush handle.

CAM00525

Once the glue dries, you may cut/indent little lines running across the top (the largest face) with your blade.

Glue it onto your toothbrush handle, and your done! I also bent the handle a bit to give it more shape.

CAM00542[1]

Clara was more than happy to model for us!

CAM00535

CAM00544[1]

Clifford, the old family cat, joined me for a bit while I was working on this, here are some shots I got!

CAM00515

“Meow”

CAM00517

CAM00518

😛

I hope you enjoyed this craft! Let me know what you thought of it in the comments! Also, how did I do with explaining and photographing? This is my first time putting a craft on a blog, so some feedback would be helpful!

Catch you later!

~Gracie 😉